Asset-Herausgeber

BannerImage

What to do if your bike gets stuck in gear 31st October 2022

All your bike's parts are crucial, but one of its most essential parts is the clutch. In addition to assisting you in changing gears, the clutch connects and disconnects the engine from the transmission. For a safe and comfortable riding experience, you must always ensure the clutch is working properly. Immediately take your bike to the closest garage if you notice any concerns so that they can be rectified.

But sometimes, it takes time to identify the issue. You might only be able to detect a failing clutch on a bike if you know a lot about how the bike and its components operate. It is always important to understand how to keep the bike's clutch in good condition.

We are here to help you with this concern! To maintain the clutch's optimal performance, consider these key points:

1. Proper lubrication of the chain:
Various motorcycle parts require lubrication to function efficiently. The clutch and chain are no exception. They need appropriate lubrication to be in their optimum working condition. If left unattended for too long, these can dry out and cause your bike’s gear to become rigid. The clutch faces significant damage, making it difficult for the rider to change the gear smoothly.
The only way to fix this issue is by regularly lubricating the chain and the clutch. Watch out for the amount of oil in the bike; if it appears low, then refill it to the appropriate level. Also, clean the chain thoroughly and later add lubrication to reduce friction.

2. Check the oil in the clutch:
The clutch needs lubrication, especially wet clutches like the ones on most high-end motorcycles and dirt bikes. The clutch oil does this to keep the clutch lubricated, control the friction, and to make it easy for the clutch plates to move. The oil also helps keep the clutch compartment cool, improving the clutch system's functioning and running the bike perfectly.

3. Sprockets:
Pull the chain away from the rear sprocket. Inspect the teeth for wear and rust. If you must replace the chain sprocket, see a professional. If you decide to replace it yourself, make sure you put everything back on the exact way you took it off.

4. Clutch cable:
Apply grease to the clutch cable stopper regularly to prevent cable breakage. In case you need to change the cable, you'll require tools, cable lube, and a new cable. To change it:

● Take off the flares and seats.

● Turn the adjuster screw down to get the clutch cable out of the clips.

● Take the cable off the handlebar as well as the engine.

● Take out the cable all the way.

● Grease up a new cable.

● Change it in the same way.

● Put the screws and covers back on.

Keep referring to these tips to spot the issues and know more about typical clutch faults and how to rectify them. Additionally, to keep your bike safe and protected from mishaps, you can purchase or renew bike insurance online if you have already had it. Remember that you can increase the longevity of your bike and ride it safely for years if you take good care of it.

Click HERE to renew bike insurance online.

Disclaimer: The information provided above is for illustrative purposes only. To get more details, please refer to policy wordings and prospectus before purchasing a policy.

global-footer-web-content